Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
UCD

The Days Haul

Recommended Posts

UCD
This is part of what I picked up to day. Also I got two tractors a B-110 with a hi-lo and 42" deck and a 2112V with hydro lift, that I have to go back and get. On the trailer is 2 36" blowers complete with hitches, 48" deck, 32" rototiller with PTO pulley setup, Complete Hydro lift setup, 42" snow plow with hitch, 2 12hp briggs engines with S/G's 2 frames with trans axels one with hi-lo and one variable, 2 real good BGB's, and a box of goodies that I haven't looked at yet. All of this for $450 plus $250 for the two tractors 200 for the trailer load of parts. I picked up in the same town a 42" deck for $60 + $40 in gas and driveing 400 miles round trip [img]/club2/attach/UCD/AttachmentsandParts5.jpg[/img]

[img]/club2/attach/UCD/IM000688.jpg[/img]

Share this post


Link to post
Share on other sites
Nick
Really nice haul, and all of it looks to be in clean shape. In the second to the last photo, is that a new house back there? I didn't see it or that fence when you showed us the pics of you clearing out your driveway.

Share this post


Link to post
Share on other sites
UCD
Reed With 7 tractors now 5 in the garage and 2 to pick up (four are mine one is my nephews and 2 belong to both of us) some of this is for spare parts. The BGB's in the two frames are tighter than some new ones I have seen. The steering gears show no wear. It never hurts to have a couple spare S/G's around. But as usual the small parts needed the most aren't there. Some might be going to GOTO and I might be takeing some to Colechester the first weekend in Oct. Nick The fence is actualy 3 cement posts with treated 2X4 rails blocking and old entrance. The lot and warehouse was a Farm equipment storage area. The ware house now has a few offices and a storage area the open lot grows up in trees and bushes and every 4 or 5 years they bush hog it.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • victorsnc
    • PhanDad
    • CarlH
    • Fungus3599
    • MARK (LI)
  • Today's Birthdays

    1. Mustangsvo
      Mustangsvo
      (37 years old)
    2. RenegadeJ
      RenegadeJ
      (82 years old)
    3. srwven
      srwven
      (50 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×