Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

Onan Starter

Recommended Posts

You might want to call this place for a quote [url]http://www.partsfortechs.com/onan_start.htm[/url] Their part number for the starter is 191194903-A Here is a link to an Onan parts diagram for a 191-1949 starter. It looks like it might be a replacement for the 191-0922 [url]http://parts-ol.com/onan/onan_P248/starter2.html[/url] Here is a 191-1949-04 listed on Ebay with less thean a day left [url]http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2487381034&category=46093&sspagename=WDVW[/url] Hope this helps

Share this post

Link to post
Share on other sites
The 191-1949-04 is not close to the 03 (been there, done that!) New are usually about $160 & used about half of that. What's the matter with your's? The 922 goes to 1052 then to 1949-03. Hope it helps! JP

Share this post

Link to post
Share on other sites
If it's not completely toasted, try to find a rebuilder. Mine would have cost about $300 new, but I was able to get a new starter drive, brushes, and bearings installed for $150. (The starter drive itself was $45.) P.S. I had a guy rebuild it who knew his stuff, and I trusted his work! That's important, too! Dave

Share this post

Link to post
Share on other sites
The bendix dont like to kick in every time, and the starter itself sounds rough. I have been limping it along for a while, just been dreading pulling the engine to change it. Thanks for all of your help!

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    1. Scott F
      Scott F
      (49 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts