Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

high-low


KC8QYB

Recommended Posts

Hi all. I have a chance to buy a 725 with a tiller . Question is did the 725 have a high-low avaliable from the factory or did somone add it. It does not look like the ones on The B series tractors.I did not know if one off a broadmoor would fit on it or not.
Link to comment
Share on other sites

The ones off a Broamoor won't fit -- and modifying it to fit isn't really practical. The ones off a B-series can be fitted, but you have to shorten (saw off) the shaft on the right side of BGB about an inch, unless I'm mistaken. The dealer installation instructions for the High-Low kit describe fitting it the to B-1 (same as a 725). http://simpletractors.com/operation/high-low/high-low.htm
Link to comment
Share on other sites

Kent you are right on the mark. I will have to do the 1 inch chop after the rear swap to reinstall Hi/Lo on my B110. I still need a lever and it's parts to make it all work again.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...