Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Salthart

Simplicity belt

Recommended Posts

Salthart
Replaced the 108505 mower belt on my 4211H and had a fit getting the thing adjusted. A few days later I replaced the blades by lifting the front of the rider and with out thinking that this machine has no deck lift on it. So the deck rollers stayed on the ground as I lifted the front. This allowed the belt to get outside the right front arm that hooks to the rider and it stayed there when the rider was set back down. I did not notice what I had done with the belt and 5 minutes was all it took to ruin it. Not wanting to fight the adjustment again, I checked the length listed for the 108505 70.1 The one sold to me was 68 inches. Has anyone ever had this happen ?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • farmer-rich118
    • Robert A McNaughton
    • ShaunE
    • MARK (LI)
    • MikeES
    • Nugal
  • Today's Birthdays

    1. littlefan
      littlefan
      (60 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×