Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Salthart

Simplicity belt

Recommended Posts

Salthart
Replaced the 108505 mower belt on my 4211H and had a fit getting the thing adjusted. A few days later I replaced the blades by lifting the front of the rider and with out thinking that this machine has no deck lift on it. So the deck rollers stayed on the ground as I lifted the front. This allowed the belt to get outside the right front arm that hooks to the rider and it stayed there when the rider was set back down. I did not notice what I had done with the belt and 5 minutes was all it took to ruin it. Not wanting to fight the adjustment again, I checked the length listed for the 108505 70.1 The one sold to me was 68 inches. Has anyone ever had this happen ?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    1. Trevor Hostetter
      Trevor Hostetter
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts

×