garryvh Posted October 26, 2004 Posted October 26, 2004 Greetings Friends. I need two pulleys to make my 32" tiller (Mfr's No. 174)operable: The first is the Tiller Drive Pulley, PN 105191. This pulley is 6.5" in diameter and fits on a 9/16" diameter keyed shaft. This pulley is missing from my tiller, is no longer available from Simplicity and my Simplicity dealer was unable to find an after-market replacement. The second is an 8" diameter pulley, PN 105188, that turns the transmission drive shaft. The drive shaft is 11/16" in diameter and is keyed. This is a larger-than-stock diameter drive pulley that reduces ground speed during tilling. This pulley is also NLA through simplicity and the dealer cannot find an aftermarket replacement. This is not required to make the tiller operational, but I would like to have the pulley for garden tilling. Does anyone have these pulleys, pr know someone willing to sell? Does anyone know a source for aftermarket pulleys with these dimensions? Thanks! GVH
Dutch Posted October 26, 2004 Posted October 26, 2004 You could try places like Grainger or McMaster-Carr. Places like http://www.phoenix-mfg.com/ specializes in pulleys. I usually make my own with Weld-A-Hub components.
cougar Posted October 26, 2004 Posted October 26, 2004 They also made a 10" pulley for the tranny, which would slow down the tractor even more
Recommended Posts