Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

need this for a while


dhardin

Recommended Posts

After almost loosing my tractor when the tie downs came loose I welded me a center anchor. Also a good place to set my boat/tractor wench to.

Found this 2 1/2 x 4" angle. Couple of holes and weld it up.

Befor I had to go over the side boards to secure the load. I had to re-weld the frame in the back after the B110 hit it.
Link to comment
Share on other sites

That should do the trick. No matter how careful I am about securing a load I always worry about loosing something. It shure could ruin someone's day.
Link to comment
Share on other sites

looks grate . you also can get what thy call D rins. which you can weld to the floor of the traler.You can by them at a welding shop that bulds tralers.
Link to comment
Share on other sites

This old snow mobel trailer has been around for about 30 years, it has a 3/4 treated plywood floor and 1/2" rubber horse tailer mat. Until i put the rubber mat on it i was replacing the floor every 4 or 5 years. There is plenty of ties to the side but none in the center till now.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...