Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
Bunky

Snowblower question??????

Recommended Posts

MPH
I would think if you have the same size pulley on the center pto as was on the front of the tractor, 4 1/2 in, and your center pto driven pulley is the same size as the driver off the BGB you should be good to go.

Share this post


Link to post
Share on other sites
UCD
The Newer tractors (3300/3400/7000/7100 700/900 series tractors RBT's) used the blower with the larger driven pulley to get the correct auger speed. If you use a blower from the FDT's with the small driven pulley you will have to remove the belt guard and replace the pulley with the larger pulley to get the correct auger speed.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×