tiller question

[JB3212v]

I'm going to look at a tiller tommorrow that was on a 2210 simplicity. Will this tiller fit and work on either my 3112 or 3212. Are the hookups the same and the pto the same? anything to look out for on these tillers. Not familiar with a 2210 are they the same as a 3212 with just a smaller motor?

[Kent]

I'm guessing it is a 32" tiller, if it is on a 2210. If so, as long as you get the tiller drive setup shown below, it will work on either the 3112 or 3212, though you'd need a drive belt longer that 56" -- it'd take a 64" as I recall... [img]http://simpletractors.com/images/tiller_ops1/figure_6.jpg[/img] Note the 3" pulley on the BGB to drive it... The 36" tiller that came with the 3112/3212 drives off larger pulley on the BGB and has a clutch on the tiller itself. To use it requires a double-pulley setup to route the belt that I don't have a picture of readily available...

[UCD]

36" tiller drive setup on left