Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

fork lift for cat. 0, 3 pt. hitch??


Dtrain

Recommended Posts

Anyone seen or have a pic of a pallet/fork lift system that will fit a cat. 0, 3 pt. hitch? Did they make one for the 620/720 and Powermax tractors? Anything like that still around? My back is sore. :(! Thanks.
Link to comment
Share on other sites

Yes, there was one, made by Brinly-Hardy: [img]http://simpletractors.com/images/9020_cat/fork_lift.pg.jpg[/img] http://simpletractors.com/simplicity/9020/allied_ones.htm I don't think they still make it -- if they do, it's not shown on their site: http://brinly.com/ I understand you can often modify Cat 1 3-point attachments by reversing the lower pins to put the lift arms inside rather than outside the attachment's frame... you may want to check with a local Tractor Supply kinda place to see if they have one you could do that to....
Link to comment
Share on other sites

Here's one for 3-point hitches: http://www.worksaver.com/product/matl-handle.html I'm sure there's more around... Here's some pics of a home-made one: http://www.tractorbynet.com/photos/showphoto.php/photo/699 Try searching Google for "pallet forks" -- that phrase seems to work best...
Link to comment
Share on other sites

hey just do as i did .i went an found an old worn out pallet jack ,got it give to me no less ,took a torch cut off everything but the main frame.fixed me a 3pt hitch on it an it works great with my allis 620 .allways old pallet jacks somewhere .good luck
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...