Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
MPH

New Landlord Lites Mounted & working

Recommended Posts

MPH
Here's a couple of shots of the new lights I got for the Landlord. Cost 5 bucks more then the rubber ones but I wantted the metal, closer to OEM look. They're made by Truck-lite Inc of Falcorner N.Y. In order to have a mounting bolt with a hole in it I picked up some lamp repair parts.

Not sure I'll being staying with this mount system, whoever did the ones on my 725 had better hardware. If it ever gets off this 30 below kick I'll test it through the woods and make sure they stay put. My lamp repair tubes aren't impressing me.

Share this post


Link to post
Share on other sites
MPH
All NAPA carries up here are the rubber ones Ray, Found these in a transmission/gear auto parts store in Fairbanks. Looked for but didn't see any chain store name mentioned around the place. Must be the last mom and pa parts store in Fairbanks.

Share this post


Link to post
Share on other sites
ehertzfeld
Truck Light huh? We in the trucking/trailer repair world, use lights made by them all the time. We have a huge catalog from Truck light, I dont remember seeing thouse in there. I'll have to do some resurch. Marty do you have a part number or s serial number? Elon

Share this post


Link to post
Share on other sites
UCD
[img]http://www.truck-lite.com/tl/tl/catalog/images/grap/fws/fd/fd02lr.jpg[/img][img]http://www.truck-lite.com/tl/tl/catalog/images/grap/fws/fd/fd02md.gif[/img] [url]http://www.truck-lite.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10001&storeId=10001&productId=24143&langId=-1[/url] [img]http://www.truck-lite.com/tl/tl/catalog/images/grap/fws/new/651W-lr.jpg[/img][img]http://www.truck-lite.com/tl/tl/catalog/images/grap/fws/new/651W-md.jpg[/img] [url]http://www.truck-lite.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10001&storeId=10001&productId=28912&langId=-1[/url] [img]http://www.truck-lite.com/tl/tl/catalog/images/grap/fws/new/652W-lr.jpg[/img][img]http://www.truck-lite.com/tl/tl/catalog/images/grap/fws/new/652W-md.jpg[/img] [url]http://www.truck-lite.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10001&storeId=10001&productId=28995&langId=-1[/url]

Share this post


Link to post
Share on other sites
MPH
Elon, the first one Maynard linked to is the ones I have Part # 80364. Got 2-3 inches of new snow today, they stayed put just fine, even plowing my walking trail trough the woods. Time will tell if I do a search for building a proper Landlord bracket.

Share this post


Link to post
Share on other sites
dorise
With a Truck-Lite factory near me all the info I got from them is they sell to NAPA and of course Ford,GM and etc. I understood that NAPA can order their products. Toll free # 1 800 562 5012. Hoped I have helped.

Share this post


Link to post
Share on other sites
mbrook
I also contacted Truck-Lite, they gave me a local distributor and Napa. I checked Napa but there price was about $8 more per light than the other distributor. I ordered mine today from the local distributor, which was "West Michigan Fleet". Thanks for the heads up Marty

Share this post


Link to post
Share on other sites
stevenj
Marty, Just my opinion, but.... I was looking at the picture you posted of the mounted lights. You might want to loosen the bezel and rotate the lamp 90 degrees so the beam pattern is correct. Steve

Share this post


Link to post
Share on other sites
MPH
Thought about doing that Steve but thinking I'd get a taller light pattern this way I left them as was. I may try it just too see which I like better. That is a ridulous price Tom, I only paid 19 dollars ea in Fairbanks Alaska. For 20 bucks each I'll mail you a set and I'd guess you would still have 15 dollars change.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×