Early B-10 Frame

[toad270]

My Early B-10 Frame was cracked when the previous owner had it and they welded a plate on each side ofthe frame where it meets the BGB. My question is will any round hood frame interchange or what ones will? Next question where can I got new stickers for the 9hp briggs engine?

[MPH]

I know a '64 Landlord frame would work as I have a stripped off B-10 frame. They are slightly different then the 725 frame and I think a few changes in the B-112 frame, which would be a sq hood. I'mguessing any landlord or B-10 or 12 frame would work.

[thedaddycat]

The earliest frames did not have the cut-out to allow clearance for the shroud of the larger 9 horse Briggs 23 D engines. Do a search and you should find more information on this. I have a few frames around if you need a replacement. As far as decals for the 23 D, I hope someone else can help you out with that one.....

[HubbardRA]

I have a 14 Hp Kohler in my 61 Wards without a cutout in the frame. I know that you can use one without a cutout, but you may have to put spacers under the engine.