Tires & Tubes on early Broadmoor

[HammockJA]

Recommendations please? I had to replace one tire on the early broadmoor so I took both of the tires off. The original Goodyear studs were still in place but one of them had rotted. These are tube! Couldn't believe this, can I get tubes that size with the 90deg. bend on the valve stem? I would like to back stud fronts, is Carlisle the only game in town? How do those look? Can this rim go tubeless? I had to cut those Goodyears away to get them off the rim, they made a good tire back then.

[Chris727]

Hi John. Those small tires are hard to find. I need a set for my Homesteader but have been dragging my feet on getting them. They were around $30 a piece from a dealer, and they would have had to order them. I've seen them on the internet cheaper but was leary about ordering them online. I have chen shein studded tires on my Allis B110, can't find goodyears anymore. They are supposed to be tube tires but I used tubless valve stems and got it to seal fine without a tube. I don't like the tubes because water gets inbetween the wheel and tube and you get a rusty mess. I think thats what caused this on a parts tractor (B110) that I got.

The wheels rusted out around the valve stem, I've seen this on a couple other wheels with tube tires on a sears. I think the new carsliles are tubless, so as long as the tubeless valve stems will work on your wheel, then you might as well go tubeless. Hope this helps. Chris

[Chris727]

Check out this site. It was where I found the best price for the carlisle studs. http://www.tiresunlimited.com/carlisle_stud.htm

[dads707]

I got a set off 5.30 X 4.50 X 6 a few years ago. They have a funny name, can't remember it right off. Nankong or something, but I am not pleased with them. They have very short studs. I would go for the Carlisle. I even thought about a rib tire, I haven't checked the web site yet to know if they are available..

[mowerman1193]

Rustybore and tucker tire have the rib tires for the front of the Broadmoors...I hope to order a set in a couple weeks...I think I have tubeless on all but one of my Broadmoors...They all have the factory Goodyears on them...

[lndscpr]

the skinny broadmoor tires and wheels are hard to find. I have been looking for them all summer.

[ehertzfeld]

Northern has studded tiers 530/450x6 for $17.99 Miller tire has studded tires 410X6 for $17.00 I know there are alot of makers that still make them. Goodyear dosn't but the Carlisle, I think are just as good. I got a set of 480x8 for the front of my 64 Landlord and they have been good. Elon

[KVANDY12]

You al may want to check out tractor supply they stock and or can order any thing you want from carlisles turf, nobby, or lug tires. Prices I thought were reasonalbe. Ken

[dads707]

I was at Tractor Supply today. They had a spot for 5.30 X 4.50 X 6 for 15 bucks, but there were none in the rack.

[splinkman]

i saw some kenda front studs online somewhere for 19.and change