Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
Wishin2BMowin

Got snow, blower works good!

Recommended Posts

Wishin2BMowin
We got snow in my area this morning, about 8 inches of nice powder. Got to try out my Simplicity 3212H with a 42 inch blower and was pleased to find it worked well. I should have replaced the blower belt though as it slipped off and got beside one of the pullies and that was not much fun to fix. Got a new belt at the local NAPA and will put that on tonight. The cab was real nice too! Did get some exhaust fumes inside but not that bad. My driveway is made up of ground up pavement and the skids on the blower didn't seem to work very well? I'm thinking of taking them off and welding a bigger surface on them to keep them from digging in so much. Think this will work?

Share this post


Link to post
Share on other sites
MPH
your gonna get real good at changing belts using NAPA belts. I haven't had very good luck with them bending backward, the oem belts are worth getting. I use them when I have too because my nearest dealer is some 2000 miles away, faster to call SLI, that only takes 4-5 days.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×