Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
johnsup

Sweepster information.....C-48-S

Recommended Posts

comet66
I don't have one but have seen a Sunstar with one on it. It had power angle on it with the shaft drive. I know they are made for a lot of different equipment, cities around here have them on Jeep CJ's to do the sidewalks, I even saw a Bolens 1050 with one. They are made just up the road from here, their address used to be Dexter, MI., but they moved outside of town now and it may be Ann Arbor, MI.. If you need their add. let me know and I will look it up.

Share this post


Link to post
Share on other sites
Jason
Hi I have a Sweeper for my 1920H, but I just have not gotten around to mounting it on the tractor yet. It is little smaller then those sweepers in the pictures above. Mine has a manuel angle but I might convert it over to a power angle. I also got to make a new mount for my 1920. The big problem I have is converting it from belt driven to shaft driven so that it will work on my 1920H. When I get it done I will post pictures. Take Care Jason B

Share this post


Link to post
Share on other sites
Dutch
quote:
Originally posted by D-17_Dave
Dutch, how wide is that one. Also I didn't see a tentioner for the belt. What are you useing it on.
It's 48" wide. The tensioner is built into the hitch. The gearbox and pulley are mounted on the spring loaded lower shelf. Raise the shelf, loop the belt over the PTO pulley, lower the shelf and the belt is tensioned. It will mount on any of my LFGTs. Right now I have it mounted on a 7016-6.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×