Update

[dbf]

To keep all informed of my original post of last week on my new to me 2110, I managed to scrounge a coil wire yesterday. I got it from a buddy of mine who owns and runs a garage. When he orders wire sets from NAPA, some sets come with 2 coil wires, which are to compensate for different distributors I guess. He always saves the surplus ones. So, long and short, I now have a good 8mm wire that shoots a nice blue spark to the plug. My friend who gave me the carberator on Monday brought the engine to work this morning and gave it to me. It is a complete 10 hp b&s, which only requires a head gasket. He was in the process of rebuilding it, when he lost interest. So I now have a spare mill. I was also given an old chair seat (covered in bleack leather) which I intend on either retrofitting or recovering the original seat. So, all that is missing from the tractor now is the voltage regulator cover and points cover. I have the points cover but cannot find the little bolts/screws to fasten it in place. Any ideas on the size of those? The voltage reg cover was removed by the po and misplaced. If he can't find it it, I'll have to cobble something up to protect it from the weather. Next-front wheel bearings.......... When I figure out how to resize pictures, I'll post them up.

[HubbardRA]

dbf, Go to Resources, Links, Miscellaneous, then download IrfanView. I usually crop the picture, then change to 16 bit color, then they will upload. Be sure to save as jpg file, and have a short name with no spaces or special characters in it. Hopefully it will then work for you. Check out "AC713S Modifications". This is how those pictures were done.

[rokon2813]

If I'm not mistaken, you must first become a member to post pictures. On the bright side, its only $10 a year and worth every penny and then some. :D:D

[dhardin]

Dan i many have the cover you are missing. Let me look around.

[HubbardRA]

dbf, rokon2813 is correct. You do have to be a member to post pictures. I overlooked that fact in my previous post. If you do decide to become a member, then you can post the pictures as I stated above. Sorry about that.

[dbf]

No worrys about the pictures guys. I never knew I had to be a member either. Dhardin-sounds good. Let me know. Thank you.

[phil]

Hey ,Dan there is a complete 10 hp in eastern passage ,,the points are missing ,but the cover and bolts are with it ,,I can give you the contact name if you'd like ,he wanted $100 dollars for the whole motor ,but that was before he found the points had disappeared..bet he'd take less now .and pay your $10 bucks to these guys WELL worth it.. Phil in Fall River