Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Transaxle question


riverrunner16

Recommended Posts

On my AC 816GT (Simp 6116) I have only third gear, after cracking the transaxle apart I found that the gear (for 1,2,R ) on the "pinion shaft and gear assembly" that drives the drive gear slips on the shaft, the gear on the assembly that drives the drive gear for third does not, I see no set screws or such that can be tightend. There does appear to be a copper? bushing between shaft and gear. Any help would be greatly appreciated ! Thanks, Scott KD7VKW
Link to comment
Share on other sites

My 6216 tranny did the same exact thing. I swapped out the tranny and haven't cracked open the case yet. I'm curious what you'll find...
Link to comment
Share on other sites

hmmmm...It is odd your's did the same thing (or maybe not)...I do have a lead on a used part to fix it (from a club member). I am interested to see what you find with yours. Thanks for the reply and let me know what ya find out. Scott KD7VKW
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...