B10 restoration question...

[AC808 0]

I have mine about 1/3 apart and was looking at the aluminum grill. Im assuming that is what it came with. Mines not in the best of condition, does anyone make an aftermarket replacement? What have any of you used?

[tanman722001 0]

Hi,I think this has been talked about before.Not to sure if there is a exact replacement for it.There is one on ebay right know if i remember right.I may be wrong tis is just my oppion.Thanks Tony

[gwiseman 1,615]

I am also restoring an early B 10 that has an aluminum grill also. I think mine could be mended - can this light aluminum be welded in some fashion? Is there a product like a JB Weld that would mend broken portions together? My grill has been cut/broken horizontally above the diamond AC (where the top curve begins)and mended w/baling wire

[tanman722001 0]

You may can get it welded back together.I got one that need fixing too.Going to try to welded it back together or maybe try brazing it back together.At lease it is worth a try.Just my oppion Tony

[MDB 134]

Here is a link to check out, http://www.normstoys.com/index.htm Norm usually has these grills in stock and they look pretty good.

[toad270 15]

It depends on if you have an Early B-10 or a late B-10 the grills are different. Heres a post of the new Early B-10 grill I received from norms toys and name plate I'm not sure if the picture will come up for you I can't see it if it doesn't let me know and I'll post the pictures again. http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=43322 Heres the link for the one on ebay right now. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=4352436719&ssPageName=STRK:MEWA:IT

[AC808 0]

Thanks guys..i should have mentioned that its a late B10.