ac 716

[trainman 0]

hi everyone..I have a ac 716 hydro and I get it to move.Everything seems to be working.It just doesn't want to move.I am hoping someone can help me here before i start tearing the rearend all apart..thanks trainman

[UCD 14]

Check the valves on the top of the unit. The bracket should be up with the valve stems out there are two valves.

[Bunky 3]

Yes check the Valves you may even want to pull up on them Carefully with some pliers... MY 7016 stuck down one time, it would go but slip in a turn or going up hills

[HubbardRA 19]

The freewheeling valves on my 716H were stuck open (plunger in). I took them off the pump and used a small nail through the flow passage to peck the check valve loose and make it seal again. I've never tried to open the valves since. In fact, I took the freewheeling latch (release mechanism) off of the tranny.

[trainman 0]

thanks guys your the best ,,i notice the freewheeling latch has the values pushed down...you guys saved me alot of time and effort...again you guys are the best thanks trainman

[IronPony 3]

Another $10 well spent. :-)