chuckb Posted March 17, 2005 Posted March 17, 2005 my face of clutch is missing some spots of the face. can I fill them with eposy and make it ok. it goes on a 416s for mower deck. thanks chuckb
JP Posted March 17, 2005 Posted March 17, 2005 Hi Chuck, You may want to check what epoxy you're using! There's LOTs of heat & 'bangin' around on the PTO magnets. I use a special type when repairing Pmax/720 electromagnets. The epoxy you choose needs to have non-conductive, high heat attributes. It's good that you're looking now. Many times I get the call AFTER. With the Pmax's, the magnet cost's almost as much as the clutch!
chuckb Posted March 17, 2005 Author Posted March 17, 2005 thanks JP I will have to start looking for some good epoxy. Do you know what brand you use.
Recommended Posts