Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Hi LO Help


ambler

Recommended Posts

On my B12 I installed pivots and Bearings and tryed to go to low range and pulley stopped. Couled it be the set screws or do I need to tear it down?
Link to comment
Share on other sites

First, make sure the set screws that hold the pulley on is tight. If not, the pulley will slide on the shaft and end up "between gears" and lock up...
Link to comment
Share on other sites

I would check the set screws first..I have heard of them getting loose and doing what you describe...
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...