Need a Muffler (Allis 712 Hydro)

[evensteven]

Hi all- Im looking for a new muffler for our Allis 712 (Kohler) ITS LOUD!!! I have not had any luck surfing accross one on-line. Any leads-links would be appreciated. Thanks!! Steve

[D-17_Dave]

Steve, check the list of site sponser's on the opening page of this site. Most any of these or any good Siplicity dealer will be able to help you. If price is an issue, then makeing your own or finding one on e-bay might be your only other alternative. Several of our sponsers cary a lot of used parts that may suit your needs Also.

[HubbardRA]

Here are some pictures of a Cub Cadet muffler that I mounted on my AC 713S. This is a B/S engine.

The outlet pipe exits thru the original hole in the hood. With the extra pipe before the muffler, this setup runs fairly quiet.

[Mack]

Well....Here's one. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=4371990643&ssPageName=STRK:MESE:IT

[evensteven]

Mack- Thanks for the link. Steve

quote:

---

Originally posted by Mack
Well....Here's one. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=4371990643&ssPageName=STRK:MESE:IT

---

[evensteven]

Thanks for the idea. Steve

quote:

---

Originally posted by HubbardRA
Here are some pictures of a Cub Cadet muffler that I mounted on my AC 713S. This is a B/S engine. [img]/club2/attach/HubbardRA/Muffler1.jpg[/img] [img]/club2/attach/HubbardRA/Muffler2.jpg[/img] [img]/club2/attach/HubbardRA/Muffler3.jpg[/img] The outlet pipe exits thru the original hole in the hood. With the extra pipe before the muffler, this setup runs fairly quiet.

---

[IronPony]

Better jump on that one on eBay!! I bought the whole set up from SandLake (one of our site sponsors) and it cost me $100. That was about 2 years ago. Man, I would go to $50 in a heart beat. Dan

[goatfarmer]

Rod,do you think the extra plumbing might cause too much backpressure? Just wordering....

[evensteven]

Dan- Thanks for the advice. I lost it in the last minutes of the auction. HEY MACK- got another one? Steve

[IronPony]

Sorry to hear you lost the ebay auction. SandyLake will be happy to help you out. It is always nice to use new parts. I can't always find them and or afford the new stuff myself. Dan

[rsachs]

Steve- sorry I was bidding against you on the muffler and adapter. The muffler would have worked for you but I think the adapter is bigger than the 12hp Kohler exhaust port. The K341 port is 1.25" and I need both for a K341 I bought last fall from Graham. If for some reason the muffler doesnt work for me I will let you know, provided you still need one. Rollin

[evensteven]

Thanks Rollin- I am sure I will come across a solution eventually. meanwhile-I have earplugs.I sure have been enjoying this site since I discovered it last week. Lots of good "chat". Its all good.... Steve

[evensteven]

Solution Found. Purchased a used muffler. Installed it. Sounds much better than the old one which had several small holes in it. Thanks Mack. Steve