Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Bracket & Hole Quiz Question...


Guest

Recommended Posts

Well actually not a quiz question, but hoping you can give me some ideas what two items are or would be. 1) Below is my B112 which circle #1 is an area where I have two holes in my hood; would anyone know what those two holes might be for? I have a sickle bar which came with this tractor, but can't see what I might use those holes for. 2) In circle #2, I have an HB112 (no pictures of that tractor yet) which has a bracket here and I am curious what that bracket was for? The bracket would bolt where the one bolt is and in the other bolt hole, then leave a hole hanging off the tractor to hook something on. Now, all I can guess it that that bracket is for a Sicklebar which I also got a sickle bar pulley setup with the HB112, but unfortunately not the sicklebar. Ideas?

Link to comment
Share on other sites

I don't know what the holes in the hood were for, but the bracket hanging down from the frame is the hook point for the chain of a sickle mower. This chain keeps the sickle mower from dropping too far down into a hole or ditch while mowing. The lift cable goes threw the pully towards the engine and backwards to the lift arm. These small brackets are bolted to the tractor frame and very often are overlooked when tradeing tractors or implements. Now that you have one, consider yourself lucky and kep it with your sickle mower.
Link to comment
Share on other sites

thedaddycat
Off the top of my head, the only thing I can think of that would use holes in spot #1 would be for a frame for a cab.... Are these the only holes, a cab would have them on both sides.
Link to comment
Share on other sites

Kirk, I was guessing the same thing. I'll take a photo of the holes and the HB112 (which is due for a photo) and attach this when I get time. I'd appreciate the help figuring it out. This is my most "mint" original paint complete machine; I only use it to cut the grass on Saturdays or Sundays :) mg
quote:
Originally posted by thedaddycat
Off the top of my head, the only thing I can think of that would use holes in spot #1 would be for a frame for a cab.... Are these the only holes, a cab would have them on both sides.
Link to comment
Share on other sites

Dave, The bracket for the cable lift sicklebar that you mentioned, doesn't mmount that far back on the tractor. It actually uses one of the bolts from the grill/hood support and the other end bolts up where the battery/gas tank support bolts to the frame. At least that where mine did. Rob
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...