slippery Posted April 12, 2005 Posted April 12, 2005 the shalf that the hight a low pully fits on seams be to long . is this all right to cut the shalf so the pully will go no and line up ??
D-17_Dave Posted April 12, 2005 Posted April 12, 2005 I think there has been some discution on this before. I don't remember the answer, but if you do a search on the topic I'm sure something would come up on it.
oldone Posted April 12, 2005 Posted April 12, 2005 I looked at the pdf. file I have and its says to cut 1" off the shaft for 9hp Landlord and the 700 $ 725 models
toad270 Posted April 13, 2005 Posted April 13, 2005 here is instructions for install there is three pages http://www.simpletractors.com/operation/high-low/high-low.htm
slippery Posted April 13, 2005 Author Posted April 13, 2005 thank you all for the help . i will let no how it works .
Recommended Posts