JJ MARSHALL Posted April 15, 2005 Posted April 15, 2005 [img]/club2/attach/jj marshall/allis chamler 003.jpg[/img] this is what been doing most of the week, turning a 312 A/C into a 318 i replaced the KOHLER engine with a BRIGGS & STRATTON was there a topic awhile back about, when changing engine from a KOHLER to a B&S or a B&S to a KOHLER that you also had to change the switch? this is the second one that i have done like this,and i have not had to change the switch either time. JJ
Salthart Posted April 15, 2005 Posted April 15, 2005 JJ, On battery fired Kohlers you run voltage to the coil from the switch. If you run the same V to the magneto on a Briggs, you'll fry it. This isn't a problem to those who know and understand this or that wish to battery fire a briggs.
JoeJ Posted April 16, 2005 Posted April 16, 2005 Joe, That is one very nice looking tractor. :DI may start today to turn a 410S into a 410H. Then a 416H into a 414H.:D Don't ask,:DI got my reasons.:D:D:D ;)If either end up looking as good as your's, I'll be pleased as punch.8D
Recommended Posts