Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  

Hi-lo system

Recommended Posts

As long as you are using a long Frame B series like the B-112 or B-210 It should go on without any problems at all, drive wise anyhow. You would probably have to use the Bevel gear box off the 6 Speed wich could run into potential problems putting your original PTO setup back together. If that is a problem you could measure the shaft diameter on the tranny drive side and see if its the same on the B series Box. If so you could use a Box or shaft from a Hydro B or 3 speed B to work in your application. Can't use the Variable speed boxes/shafts as they are different.

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this