Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
Ryan

I finally found one..

Recommended Posts

Guest
Well I found new your setup would cost $171.03 ordering all the parts below (still available new). So if you beat that price, you did well. Congrats. Note: The following parts list was taken from the 990545 tiller:

C 105340 "V" Belt, Sovereign Tractor AK 105322 Arm Idler Assembly AL 156306 Pin AM 106787 Spring Clip AN 105380 Idler Pulley AP 105351 Belt Guard, 1/8 x 1 x 4-1/8" AQ 705031 Hex. Capscrew, 3/8"-16 x 7/8" AR 717003 Full Hex. Nut, 3/8"-16 AS 720002 Lock Washer, 3/8" AT 164083 Idler Pulley AU 719002 Plain Washer, 5/16" AV 705016 Hex. Capsrew, 3/8"-16 x 1-1/4" AW 720002 Lock Washer, 3/8" AX 717003 Full Hex Nut, 3/8"-16 BE 167032 Belt Stop You may need these on your tractor.... AY 164202 Pulley AZ 8061081 Key ======= 32.31+57.51+1.22+.25+53.17+5.6+.34+.07+.04+18.81+0.05+0.33+.04+.07+1.22=total $171.03 105340 V BELT HB 096 $44.24   Qty: A F T E R   M A R K E T   P A R T S 258096 TRUE BLUE BELT $32.31 105322 Order the New Substitute Part Below $0.00 1657777   Order the New Substitute Part Below 1657777 ARM ASMY IDLER $57.51 156306 PIN RND HD DRILL $1.22 106787 Order the New Substitute Part Below $0.00 1960074   Order the New Substitute Part Below 1960074 CLIP HAIR PIN 0 $0.25   Qty: A F T E R   M A R K E T   P A R T S 416784 HITCH PIN $0.36 105380 PULLEY 04 500OD $53.17 105351 GUARD BELT $5.60 705031 Order the New Substitute Part Below $0.00 1921966   Order the New Substitute Part Below 1921966 CAPSCREW HEX HD $0.34 717003 Order the New Substitute Part Below $0.00 916950   Order the New Substitute Part Below 916950 NUT HEX 375 16 $0.07   720002 Order the New Substitute Part Below $0.00 1916965   Order the New Substitute Part Below 1916965 LOCKWASHER SPRIN $0.04 164083 Order the New Substitute Part Below $0.00 1657712   Order the New Substitute Part Below 1657712 PULLEY IDLER 03 $18.81 719002 Order the New Substitute Part Below $0.00 1919326   Order the New Substitute Part Below 1919326 WASHER 0 312 0 3 $0.05 705016 Order the New Substitute Part Below $0.00 1920415   Order the New Substitute Part Below 1920415 CAPSCREW HEX HD $0.33 720002 Order the New Substitute Part Below $0.00 1916965   Order the New Substitute Part Below 1916965 LOCKWASHER SPRIN $0.04 717003 Order the New Substitute Part Below $0.00 916950   Order the New Substitute Part Below 916950 NUT HEX 375 16 $0.07 167032 STOP BELT 188WI $1.22

Share this post


Link to post
Share on other sites
Wishin2BMowin
I was snake hunting once as a child in northern Kentucky (the things you do to try and kill yourself as a child) and turned over a large rock and a BIG Copperhead almost bit me in the face! Lucky for me he missed! That pully setup is what I'm missing for my tiller on my 3212H but my buddy thinks it's at his folks place in NH. Thanks Michael for the parts list just in case I can't find it!

Share this post


Link to post
Share on other sites
SmilinSam
This is my solution: [img]http://a6.cpimg.com/image/50/02/33656656-3277-01B20186-.jpg[/img] [img]http://a7.cpimg.com/image/51/02/33656657-eda9-01060172-.jpg[/img] All out of spare idlers saved from junk tractors. The slotted hole for the top idler allows me to use different size pulley combinations so I am ensured to have something laying around here that will fit.

Share this post


Link to post
Share on other sites
Guest
Hey wishin2Bmowin no problem and thanks Sam, I like getting those ideas... you never know may need that part myself. As for me and those parts lists, I've been typing those in and intend to make a database for each of my tractors, expect to get all the pricing and figure out what it'll cost to make these from groud up one day. Not like I'd do it, but figure for kicks it'll be amuzing to know.
quote:
Originally posted by Wishin2BMowin
I was snake hunting once as a child in northern Kentucky (the things you do to try and kill yourself as a child) and turned over a large rock and a BIG Copperhead almost bit me in the face! Lucky for me he missed! That pully setup is what I'm missing for my tiller on my 3212H but my buddy thinks it's at his folks place in NH. Thanks Michael for the parts list just in case I can't find it!

Share this post


Link to post
Share on other sites
Guest
MikeES- This parts list was taken from the MFG# 990545 tiller. Then I looked up each part on some of the vendors that advertise on this site. So it should fit the 3200 series according to what fits... Please correct me if I missed something in the lookup. Note: I modified the picture by removing excess lines so I only showed the parts that make up the "tiller drive".
quote:
Originally posted by MikeES
Hey wishin... the parts list is for a sim 3400/7000/7100 tractor and not for a 3200 series.

Share this post


Link to post
Share on other sites
IronPony
I needed the same parts to mount my tiller with. Priced it out at Sand Lake and at the same time I was looking on eBay at a used tiller that came with all the needed mounting parts. Ended up just paying about twice as much but also got a good tiller off eBay. Now I have a "parts" tiller. Sometimes it might pay to buy more than what you need?!?! Dan

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×