Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
JJ MARSHALL

910 with vac

Recommended Posts

JJ MARSHALL
This is a project that i did about 4 years ago [img]/club2/attach/jj marshall/910vac 001.jpg[/img] i took a factory A/C -- SIMPLICITY vac and made a bracket to mount a catch box and vac all together and to fit A/C and SIMPLICITYS lawn tractors.( not all ) [img]/club2/attach/jj marshall/910vac 002.jpg[/img] it also dumps [img]/club2/attach/jj marshall/910vac 003.jpg[/img] JJ

Share this post


Link to post
Share on other sites
JJ MARSHALL
i'ts a little light . some time it pushes on sharp turn but most of my lawn is flat. i have thought about put a little weight on front but the way that it's steers it's almost like power steering. but on a short frame tractor you might have to have some front weights. JJ

Share this post


Link to post
Share on other sites
KVANDY12
JJ I haave a pto driven vac like that but with the bags.was wondering where did you find the container, how is the dump container mounted to the back. My back is getting to the point where it does't like pulling and lifting heavy stuff much anymore. And dumping would be easier.

Share this post


Link to post
Share on other sites
JJ MARSHALL
KEN this box came off a TORO MOWER i think it was grass and leave catcher not sure if it used a vac are not . i mabe the bracket out of some angle iron it fasten back under the vac to the vac bracket. i also used a large piece o threaded rod that runs from the bottom of bracket to the hole on vac bracket . it hard for me to explain. but if you will email me i will send you some close up pictures. JJ

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×