skmcps01 Posted April 30, 2005 Posted April 30, 2005 Hey, I'm new to the club,I have a locked up Transmission. Will shift into 2nd and 3rd axel will not turn. Its a great tractor with few hours belive it or not. Help
comet66 Posted April 30, 2005 Posted April 30, 2005 Well ScottI'm afraid I can't help with your problem but I can welcome you aboard. Someone will be along shortly to help out.
oldone Posted April 30, 2005 Posted April 30, 2005 Welcome to the club,Scott Here's a link that might help you out. http://www.simpletractors.com/club2/portal_External.asp?LinkID=153&LinkName=Manual%20Transmission%20Stuck%20In%20or%20Between%20Gears&CatID=18&CatTitle=Transmissions&URL=http://www.simpletractors.com/club2/topic.asp?ARCHIVE=true&TOPIC_ID=11763&
johnmonkey Posted April 30, 2005 Posted April 30, 2005 Welcome and good luck. I am sure that someone will be along to give help. JH
KSever Posted April 30, 2005 Posted April 30, 2005 Oldone, Is this the one you were referring to? [url]http://www.simpletractors.com/club2/topic.asp?ARCHIVE=true&TOPIC_ID=11763&[/url] Since I've gotten the rearend repaired this A/C 314 tractor has been a real workhorse.
skmcps01 Posted May 3, 2005 Author Posted May 3, 2005 Whats this bent screwdriver trick? I'm still stuck.
HubbardRA Posted May 4, 2005 Posted May 4, 2005 Supposedly you can remove the fill plug on the tranny, and with a small bent screwdriver, pop the tranny back into neutral so that it will shift again. Several people say they have done it that way. The daddycat wrote a post on it, but I can't find it right now.
KVANDY12 Posted May 4, 2005 Posted May 4, 2005 Scott go to page 6 and look at my post stuck in 1st gear. the bent screw driver post is there. welcome to the club hope this helps. Ken
Recommended Posts