Attaching Mower Deck

[beuce 0]

I don't suppose anyone would post a detailed picture on how a mower deck (48") attaches to a Homelite T-16 or AC/Simplicity equivalent? I'm not sure how the lift cable attaches to the deck. Thanks a bunch :) Brian

[HubbardRA 19]

There is a pin (bolt) with a hole thru it that sticks thru the pulley covers. The cable attaches to that with a pin.

[beuce 0]

Rod, OK, I have two decks, one that fits my 3112v, and a different style one that appears to have the bolt. Am I correct to assume that the deck that fits the 3112v will not fit the T-16 with out modifications? I only have enough parts to get one deck up and running and was hoping to use one deck for both machines. Thanks for your insight!

[HubbardRA 19]

Beuce, I don't know the subtle differences between the two decks. I do know that you can make a bolt for the lift to attach to. I made one for the mower deck that I currently use. I rebuilt this deck last summer. The one from another deck was too long and would not lift the deck high enough. I have three 48" decks but two still need rebuilt for both rust and bearings. All of the decks that I have are interchangeable. If the deck hooks to the front axle properly, has the correct size driven pulley, and has the right lift connection, then it can be used.

[beuce 0]

Oh man, I didn't even think about the pulley size differance. I am sure the older deck has a smaller diameter pully then the newer deck... Thanks, Rod, for your help, I will get it figured out one way or another. brian

[RayS 79]

Either deck will fit. If you use the one off of the 3112 you will need a different belt thats all. I have a deck that goes on a HB 212 on my 917H.

[beuce 0]

Ray, Cool thanks for the info.