Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Boney

Sleeve Hitch Help please

Recommended Posts

Boney
I have a friend helping me modify/build a sleeve hitch. He is not familer with them. I have searched but have not been able to find a picture/diagram of a sleeve hitch and relation to lift rod for the 725 or similar model. Does anyone know where I can find this on here. I would like to be able to print it out and give it to him. Thnx for any help

Share this post


Link to post
Share on other sites
Guest
Herm - ... See article on SimpleTractors: http://www.simpletractors.com/images/hitch_adaptor.jpg See this post: http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=48605

Share this post


Link to post
Share on other sites
RayS
Here is a resent post that has sleeve hitch pictures in it, http://simpletractors.com/club2/topic.asp?TOPIC_ID=48605

And here is a detailed drawing of the new style sleeve hitch.

Share this post


Link to post
Share on other sites
GregB
Just a caution, verify the sizes of your friends hitch mounting points. On my B-10 I cannot mount my later style hitch(like in the drawing above) without spacing out the one hitch bar. If memory serves me I added about 1/4 inch or so. The sleeve height, where the pin goes thru is also a little different in height. GregB

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×