Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
DoubleT

At least it looks AC

Recommended Posts

DoubleT
Ok while trying to find parts for the Big Ten locally, I remembered one that had same coloring, and basic shape, only dual wheels. Got a little closer look, and it turns out to be an IH. Perhaps taller and longer, but the styling still seemed the same Even the sheet metal framing/tunnel that connects the front with the transaxle looked the same. 14hp single though. Is there some relation between AC and IH in their garden tractor lines? Would there be a contract put on my life if I asked what model IH it is in here? If I get this one, I can just slap a motor in it and use it, then take my time to do a nicer job putting the Big Ten back together.

Share this post


Link to post
Share on other sites
Guest
Hey Bruce its ok we all do it now and then. The two companies are in no way related or have ever been that I know or have heard of. Click on return to simpletractors at the top of this page. Then when you get to simpletractors home page click on links. Then follow that page down until you come to tractor forums and you should see one for IH products. I am in no way saying that you can or shouldn't beable to ask your question about IH tractors here. Its just a suggestion as you may get the information sooner or more correct from people who do own them. Maybe someone here can help you put I just don't have the knowlege about them. Best of Luck-yes its me

Share this post


Link to post
Share on other sites
Guest
Thanks. Didn't find what I was looking for there, but I'll work on those guys a bit.

Share this post


Link to post
Share on other sites
Al
I have seen a few Pulling tractors that have been made from Simplicty tractors spliced to the cub transaxle. because they hitch so close to the center of the axle and many ratio gearsets are available these aare the choice of pullers, but the tractors still look a lot like the originals. Could you have stumbled on somebody's old puller. Just wondering.
Al

Share this post


Link to post
Share on other sites
DoubleT
Nope. Pulled away a bunch of junk, and finally found it to be a Cadet 100. Would have been obvious to most anyone else I guess, but I'm a garden tractor virgin. I grew up where any wheel tractors were rare. Case and JD crawlers were garden tractors, a D-4 a compact.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • gwiseman
    • bvande
    • PhanDad
    • Bill725
    • MARK (LI)
    • a_sannine
    • rokon2813
  • Today's Birthdays

    1. littlefan
      littlefan
      (60 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×