firefoxz1 Posted May 31, 2005 Posted May 31, 2005 Picked up a 3212H(Sovereign) in NJ with a rebuilt hydro and a really decent 48" deck (needs a new roller bar and rollers). I was hoping it also had the lift but no luck on that yet. It had no grill hood or engine (parts tractor). Last week I picked up a 3012V(Sovereign) in nice shape with a rebuilt 12HP Briggs in it but was upset when the BGB was very sloppy and the variable drive was rerigged to just pullies. I talked the guy down in price and he threw in a 46" Dozer blade he had. I thought I had just wasted a little time and money getting them and figured I would sell the parts. I had them sitting next to each other and it hit me, the front is trashed on one and the rear is trashed on the other. Started taking measurements and decided the rear and handle assy will fit on 3012. Here are some pics from the weekend. [IMG]http://img.photobucket.com/albums/v233/kismar/29May05005.jpg[/IMG] 3012V without hood and grill [IMG]http://img.photobucket.com/albums/v233/kismar/29May05006.jpg[/IMG] Dozer blade [IMG]http://img.photobucket.com/albums/v233/kismar/29May05010.jpg[/IMG] 3212H in pieces [IMG]http://img.photobucket.com/albums/v233/kismar/29May05004.jpg[/IMG] [IMG]http://img.photobucket.com/albums/v233/kismar/30May05001.jpg[/IMG] What's left of the 3012V to clean-up [IMG]http://img.photobucket.com/albums/v233/kismar/30May05005.jpg[/IMG] 3012 with the Vickers Hydro behind it Just need to clean and lube both halves before reassembly, also have to make one good BGB from both(need the input shaft from the 3012 to put in the 3212's) I only need one part, a good seat pan and seat from a hydro unit or repair what I have.
clyde Posted May 31, 2005 Posted May 31, 2005 Nice work - looks like you will end with a good tractor and a couple of spare parts to boot!
Recommended Posts