DUAL WHEELS ADAPTORS

[JJ MARSHALL 0]

does anyone have the overall dimension on the dual wheel adaptors? if so could or would you PM me or post them here? i am trying to make a set for a 2012 SIMPLICITY. THANK JJ

[HubbardRA 19]

JJ, It is dependent on the wheels that you are using. Put a straight edge across the face of the wheel on the outside and measure to the seating surface of the wheel (where it would mount to the hub flange). Turn the wheel over and do the same thing. Add the two measurements together and add about 1/2 inch for tire clearance. This is the length from outside to outside on the flanges. I hope this is what you are asking for. Maynard posted a picture illustrating this, not too far back. You might do a search and find it. Don't remember title of the topic.

[Leroy 0]

I think this is the one Maynard posted on that your refering to. http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=49518

[Guest]

So what are the dimensions of the original spacers by part number? Were there multiple part numbers? Yes, Maynard has posted the proper dimensions you need when designing your own. It was talked about very recently.