Pure Power Setup

[ambler 0]

I'm building a tractor to cut a path in my woods An Early 7117H (K341 now)with Heavy duty Tiller and Dutch and John's grader blade. Anyone have one with this headlight decal?

I attached the rear lift so that when it is up the grader is down and vice versa. I still have to hang the grader blade for travel. Maybe a right hand lift. The piece de resistance is for the front of the tractor.

A winch for getting out of trouble from Sam's Club.

[john-holcomb 0]

Nice looking tractor, I had a 6116 with that decal on it but I never saw one on a 7117. I put the narrow tires off an older tractor on my work tractor I think they steer better in the woods and on rought or slippery ground. Good Luck

[JoeJ 0]

;)Looks real good Ambler!! :DTo good to be running the woods with.;) Joe

[ambler 0]

Thanks Joe. John I have a set of narrow wheels if necessary, I will need 75-100 lbs of front weight with that 300 lb Tiller on back.

[AC808 0]

I like it! No i havent seen one with a decal like that...

[comet66 0]

That's a good looking set up Ambler, it should certainly get the job done.

[PGL 431]

I'd be interested to see how you mount and connect the winch and have your comments on how well it works.

[ambler 0]

I'm going to take 4" by 4" L steel and bolt it to the frame under the hood grill. Lines go to the battery with a 50 amp slow blow fuse. This kit has everything but the L plate.