swolf Posted August 7, 2005 Posted August 7, 2005 Just put a rebuild kit in my carb but forgot to write down the screw setting for the jets. Can anyone give me the basics to start? Also, I didnt get a key when I picked up the tratcor. I figured that the one wire to the back of the switch is just a ground so I just removed it. The motor turns over but I cant get it to fire. Engine has spark but won't go. I'm wondering if my idea of just removing the wire is my problem? (64 Landloard)
toad270 Posted August 7, 2005 Posted August 7, 2005 both screws should be turn all the way in then back them out 1 1/2 turns that should get you started then adjust from there. there was a post about carb adjusting but i can't find it maybe someone has a link for it. if I remember correctly the switch is just a kill switch that grounds out the motor so if you unhook it the motor should run and reconnect it the motor should stop
Recommended Posts