Big Ten seat

[T340 0]

I am in the process of redoing my Big Ten and need a source for a new seat cover. Any body out there have suggestions or sources? Thanks Tim

[dorise 0]

Under the Simple trACtors heading at the top of the page go to Parts and Manuals and there is a couple sources for seat covers.

[toad270 15]

I bought mine from Mary Gearheart here is a link http://www.simpletractors.com/parts/a-c_seat_cushions.htm and here is a picture [img]http://www.simpletractors.com/club2/attach/toad270/se.JPG[/img] very nice

[mark64 0]

I also picked up a seat for my B112 from Mary. Very nice seat and fit just like it was from the factory!

[Vinnie_A 3]

Whomever you purchase your seat from make sure you get the one with the soft foam cushion or you will be in for many uncomfortable rides. I had to return a rock hard model for a soft one that I purchased from Sandy Lake.

[Kent 435]

If you want to be "technically correct" in a true restoration, then you need to get the sewn, pleated seat from Sandy Lake for a Big Ten. They also sell the less expensive, heat-pleated ones, which are "technically correct" for the later B110/112/210/212 models... BTW, the heat pleated ones they sell are also made by Mary. They have the sewn, pleated ones made locally...

[T340 0]

Thanks for all the info! Now do you have any leads on where I can get the metal arm rests? Thanks Tim

[dlcentral 1]

I'm going to be making armrest pipes,, the 2 short ones for the B-10 and the longer 1 piece B110's

[Chris727 1,927]

I emailed Sandy Lake and they said they are out of the seats with sewn pleats but should have some in about 2 weeks.