Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Guest

3416H

Recommended Posts

Guest
What's the cubic inches and horsepower on the Briggs in my 3416H? Will it fit in place of a K-301, or is it too wide?

Share this post


Link to post
Share on other sites
Kent
If original (check the engine model no. below carb near frame) it should be 326431 indicating 32.6 CI and 16 HP. Not all Kohlers have the same style oil pan mounting so it depends on what you are trying to do.

Share this post


Link to post
Share on other sites
Guest
I'm thinking of putting it in my CC128 to replace the 6 horse Kohler that someone had in it. The Kohler is well-ventilated! Have had no luck finding Kohlers in South Florida.

Share this post


Link to post
Share on other sites
dlcentral
I agree with Jeff, the 16 hp B&S will fit in place of a K-301 if the kohler has the wide/large pan. If the koh bolts up to trac. from the under side of oil pan it will not work without some fabriction. BTW you won't find a Briggs with an "air cond." block! Good Choice and good luck! dlc

Share this post


Link to post
Share on other sites
Guest
What I'm trying to do is replace a K-301, (small flywheel, starter-generator model) in my wide-frame Cub Cadet model 128.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • tripleguy
    • littlefan
    • DIMichael
    • MrMd
    • Talntedmrgreen
    • Mine19821
    • MARK (LI)
    • kwt
    • jjackso5
    • Alltractoredup
    • lt-scir
  • Today's Birthdays

    1. littlefan
      littlefan
      (60 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×