Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Russell Miller

Belts

Recommended Posts

Russell Miller
I need to know the proper size of belt for Allis Chalmbers Big Ten for the PTO. I also need a new drive pulley and the idler pulley any ideas where I can get these? Thanks

Share this post


Link to post
Share on other sites
UCD
2025060 Allis Chalmers BIG-10 Drive Belt # 154273 Length 42.3" Type HL See Note Below. Generator Belt # 1607323 Length 37.5" Type 3/8 P.T.O. Belt # 164146 Length 34.1" Type HA Power Lift Belt # 157230 Length 22" Type 3/8 2025061 Allis Chalmers BIG-10 Drive Belt # 154273 Length 42.3" Type HL See Note Below. Generator Belt # 1607323 Length 37.5" Type 3/8 P.T.O. Belt # 164146 Length 34.1" Type HA Power Lift Belt # 157230 Length 22" Type 3/8 Note*Units with Low Speed Pulley use Belt # 174486 Length 48.9" Type HB As for the parts watch Ebay and place a want ad in the classifieds.

Share this post


Link to post
Share on other sites
D-17_Dave
Yes, those are simplicity #'s Maynard gave you. Also the low seed pulley was an option to slow down the tractor for certain tasks. All this was was a larger pulley placed on the input shaft of the trans. giveing you an overall reduction in ground speed in all gears. By useing a diff. diam pulley you needed a diff. drive belt.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×