Cat-0 and Cat-1 specifications

[Boogity 0]

Do any of you guys have any drawings with dimensions for the cat-0 and the cat-1 3pt hitches? I know I had a drawing around here somewhere that had a drawing of a generic hitch with a chart showing all the dimensions and pin sizes for cat-0 thru cat-3. I think it also showed all the minimum steel thicknesses for each part. But do you think I can find it? Noooooooooooo!

[Guest]

I would be interested in the same info. All of my efforts searching online have turned up nothing.

[KVANDY12 0]

If you can find the drawing I'd be interested in them also. Ken

[AcFordHawk 0]

Not a complete information package but may help a little bit. http://www.speeco.com/three-point.asp

[Boogity 0]

I guess the chart is telling us that the spread between the lower arms for a cat-1 is 20 inches. Right?

[AcFordHawk 0]

I believe the chart shows 20" for Cat 0 and 26" for Cat 1.