Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Wishin2BMowin

3212H Vickers has a leak?

Recommended Posts

Wishin2BMowin
Hi All, I have a 1970 3212H I got from my buddy last year. Did just enough work on it to be ready for last Winters 100 plus inches of snow that the 42 inch blower did well on. Wanted to use it this year for mowing but the mid PTO was worn out. Trying to be more ready for this Winter and did some checking of the level of the various juices and found the Vickers was almost empty. Have noticed a leak under the rear axle and thought it was the axle seals but after checking the drip noticed it was not gear lube but red trans fluid. Looked over the Vickers and it looks like the leak is coming from the shaft where the hydro control linkage hooks to. Is this a common place for the Vickers to leak from? Is there a seal I can replace there or is the shaft worn out? Thanks for any help...

Share this post


Link to post
Share on other sites
callwill
This will get you started. http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=26986&SearchTerms=pintle It is a common place for them to leak... Mine does-and has for a long time & i don't have the time to tear it apart to fix it. Someday i will buy a newer tractor...if my buddy will ever part with his Ingersol & buy that kubota he wants

Share this post


Link to post
Share on other sites
RayS
Here are a couple of links that have them as well. http://www.ahx1.com/ http://proactivefluidpower.com/vickers_transmissions.htm The 1st one will give you a price and they are not cheap the 2nd one will give you a run around.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • gwiseman
    • s_stephen
    • bkassulke
    • macallis180
    • jwbegor
    • abu507
    • PGL
  • Today's Birthdays

    1. PlayBoy
      PlayBoy
  • Recent Status Updates

    • SonOfCreepfeed

      SonOfCreepfeed

      Thinkin' about this old girl.

      · 3 replies
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
  • Adverts

×