Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Tecumseh Question


Mick14

Recommended Posts

I'm just finishing up a Tecumseh 8hp.,there are some wires that i can't figure out ,they have something to do with the carb,but aren't actually attached to it.in line in the wiring there's a small round thing that must have some purpose,anyone know what these are and how do you know if they are working ? Thanks
Link to comment
Share on other sites

It seems to ground out the ignition,if the throttle is set to low,a lot more complicated than it needs to be.looks like a "murphy" waiting to happen.
Link to comment
Share on other sites

Sounds like the on/off switch. I have a B/S push mower engine that is set up that way. Pull the throttle all the way back to shut it down(grounds out the ignition). To start, you must advance the throttle fully the other way to choke it. You can still adjust the engine speed any place between the two positions.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...