725 Snowblower Clutch Bracket.-Mick14

[MPH 12]

As my snow got too deep for the blade and the 42 inch blower project is going too slow, had to pull in two 36inchers, put the hitch and such on the one with the new bearings and mount it up on the 725. Here's a pic of what I made up to hold the clutch bracket Mick. Thought about your post while mounting it. Used a piece of 3/16x1inch strap off old telephone pole bracing.

Hammered about a 1/4 inch 90 degree bend on the bottom so it would stay straight with one bolt.

[lboy1971 0]

How do you like those front tires?

[Mick14 0]

Thanks Marty,i have a couple of piece's of the pole strapping,hope you don't mind me copying your idea .

[MPH 12]

I like those tri-ribs better then any others I have. Have thought about studding the center rib for winter use on snow pack. Not at all Mick, why I postted it, ideas are cheep

[Mick14 0]

I used a piece of that strapping ,but got an idea from your photo,and mounted it on the rear S/G mounting bolt--my S/G is dead ,so the bracket is not being used,very quick and easy,thanks again. LLoyd,you will be impressed with the tri-ribs.

[lboy1971 0]

A couple years ago I got several boxes of tire studs along with the air powered drill/gun for installing them. Might have to try them in some tires this winter.