Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
B.Ikard

Tire size question

Recommended Posts

B.Ikard
Gents, I have a chance to get a pair of new 24X12.00-12 turf tires on new rims at a good price. I was curious if these would bolt up in place of the 23x10.50-12's on my 7014 with any clearance problems,etc? Any suggestions would be appreciated. Ike CORRECTION Guys I got my wires crossed.....I have 23x8.50-12 tires on my 7014 !

Share this post


Link to post
Share on other sites
RayS
They should the ones that are on Rodneys tractor in this other post are taller. Just make sure there is enough room with the offset of the other rims. http://simpletractors.com/club2/topic.asp?TOPIC_ID=56234&SearchTerms=tires

Share this post


Link to post
Share on other sites
HubbardRA
The 24x12x12 tires should fit fine if the backspacing of the wheels is correct. You can measure that by putting a straight edge across the side of the 8.50 tires and measure to the seating surface. Then measure the 24x12x12 tires and see if they have the same backspacing or less. If the do, they will fit. The problem with the larger 26x12x12 tires is that they are extremely close to the fenders. I put spacers under the front of my fenders to raise them enough to prevent rubbing. If you are getting the wheels and tires from a ZTR type mower, be sure and check the bolt pattern. Many of those use only 4 bolts on the wheels, instead of 5.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • rich_kildow
    • abu507
    • maxwood
    • CVSB10JCS
    • SmilinSam
  • Today's Birthdays

    1. PlayBoy
      PlayBoy
  • Recent Status Updates

    • SonOfCreepfeed

      SonOfCreepfeed

      Thinkin' about this old girl.

      · 3 replies
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
  • Adverts

×