plow handle support bracket

[ridgerunner 3]

If anybody on here has a plow that you can angle from the seat, I need the dimension of the support bracket that bolts to the tractor that supports the rod that angles the plow. This is for a Big Ten or Simplicity equivalent. The main thing I need to know is how far does it stick out from the tractor. And do you use the top front side cover bolt to bolt it to the tractor? Thanks for any help. -Paul

[RayS 79]

Here are the dimensions from one that I traced out a while back. You do use the top front hole that the side cover fastens to.

[ridgerunner 3]

Thanks Ray. That was the last piece of the puzzle that I needed to fabricate. -Paul