Jeff Walters 0 Posted January 24, 2006 will dextron 3 transmission fluid work in my 919???? ANY ONE HAVE ANY 919 PARTS TO SELL OR A WHOLE JUNK TRACTOR! Share this post Link to post Share on other sites
firefoxz1 4 Posted January 24, 2006 I use ATF type F whenever I flush and fill. You can use Dexron 3 if not just topping it off and are doing a complete fill. Manuf would really like you to use Simp multi pupose hydro fliud. The only thing I wouldn't do is mix these fluids together. Share this post Link to post Share on other sites
MDB 134 Posted January 25, 2006 Why don't you go by what the chart recommends.... http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=22258 Share this post Link to post Share on other sites
Kent 435 Posted January 25, 2006 Jeff, Please use the classifieds to specify your "wants" -- I'm not going to PM you again, warning you. I'm just going to keep on deleting your posts. Kent Share this post Link to post Share on other sites
Chris727 1,934 Posted January 25, 2006 Jeff, this is like the 3rd or 4th post you have made which basically refers to the exact same topic. May I suggest that it would be better if you could just continue replying to the initial message about "trans oil" and that way it keeps the whole topic together instead of all over the place. MDB, Some of the info on the chart looks wrong to me. They call for SAE 90 gear oil in the 3 speeds while on the 900 AC 3 speeds they call for the "multi-purpose hydualic oil." Shouldn't these transmissions both use the regular gear oil? Share this post Link to post Share on other sites
Chris727 1,934 Posted January 25, 2006 The Simplicity Large Frame Service Manual on pages 14-2 and on 14-21 Recommends the following hydraulic fluids for the Sunstrand series 15: Type A, Type F, or Dextron, or Simplicity Multi Purpose Hydraulic Fluid. According to the book, any of these should work! Share this post Link to post Share on other sites