Hydrolift repair

[FastPaul 0]

Started looking at the H.L. this morning,look like the solder joint on the tank and the end plate failed,any ideas on repairing,resolder brase or mig weld,I also want to reseal the input shaft if I can find the seal? also dose anyone know the releif psi I want to bench test this unit first. Thanks guy;s

[ambler 0]

The seals are still available from parker. There were posts from albj93 with the numbers. Maybe you should pm or email him.

[oldone 0]

[url]http://www.simpletractors.com/club2/articles/hydraulic_lift.htm[/url] Heres a link to resoures at the top.

[FastPaul 0]

Thankyou very much John this info will be very helpfull

[slin 0]

I would solder it. If you don't seal it the first time, you hane a better chance of redoing it.

[RayS 79]

Here is a seal kit for the pump if you are going to rebuild the pump. But it maybe different because you have the square tank type and the kit in the picture is for the round tank style.