Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
blackfarms1

4040 vs 4041?

Recommended Posts

jackcobb
The difference is the engine. The 4040 has a CCKA at about 16.5 HP. The 4041 has got a CCKB at 20 HP. The major difference in the engine is the manifold and carb. I know guys who have put CCKB carb manifolds on the A's and your right up there. Of coarse decaling would be different but parts are almost 100% interchangeable.

Share this post


Link to post
Share on other sites
D-17_Dave
There are several other differances in the actual tractor. Early rear pto's on the 4040's were a whole diff. setup on the shaft but the later model stuff replaced all the early setup. The axle shafts were beefed up after the 4040 model. The ignition switch was moved to below the dash in the screen to help prevent water from intering the switch. There are differances in the chargeing system between the 2 style engines. There are a few 4041's with a single lift lever on the left side of the dash. But as a general rule most everything from 4041 and later had 2 lift levers that split the front and rear lift's so you could mount 2 implements at one time. Most mods can be done to upgrade you 4040 to the newer style tractorexcept the axle change. That too can be done but as long as you don't break the old one you won't need to change it. There are some differances in some of the fenders also but thats only cosmetic.

Share this post


Link to post
Share on other sites
blackfarms1
Thanks guys, this is the greatest club ever. I have asked 3 or 4 questions (probably for you guys all repetative) and gotten answers in mere minutes. As I have learned to navigate the site have learned most of my questions have already been answered. I will post some pictures as soon as I start to work on the tractor. you guys are great!!! thanks sean

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Eddie Tomahawk
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • SonOfCreepfeed

      SonOfCreepfeed

      Thinkin' about this old girl.

      · 3 replies
    • Dean McFadden

      Dean McFadden

      Good morning peeps! I’m always searching for helpful information with my AC collection. Hope to find out new information and pass on my own experience in restoration. Here are some pics of my babies. I’m still looking for front rims for the 410 so yesterday I put the 310 wheels on took it for a drive. Working pretty good but still needs some carb work. Gotta get the 310 running next. Have a great day!😁
       

      · 1 reply
  • Adverts

×