jimwil Posted June 28, 2006 Posted June 28, 2006 I sheared off the two black wires going to the pto clutch and when I re-hooked them I get no pto. Any help? I don't see any fuses and the safety still works but no light on the dash and no pto engage. Thanks in advance.
D-17_Dave Posted June 28, 2006 Posted June 28, 2006 Welcome to the club Jim. I'm not sure what your problem is but I would look at the wires up line in the wireng harness. You could have pulled the wires in half in more than one location. Also you may need to get a good meter and ohm out the coil to make certain your repair is good and there isn't any further damage to the coil.
Recommended Posts