Boney Posted July 23, 2006 Posted July 23, 2006 I have had a center PTO for a couple of years now and am finally getting around to finishing the cutting deck and want to put it on. I have never mounted a center PTO before and am having trouble. I have looked at the drawings in the manual but still dont understand it. { mentally challenged } Is there a picture around here of a center PTO on a 725 or similar tractor ? I have looked but have not been able to find such a pic. Thanx for any help
ehertzfeld Posted July 23, 2006 Posted July 23, 2006 Not sure what your having trouble with but here are a few different ones. This is on my 725. It's actually from an early wonder boy 700 This is my B1 And here is my Landlord They all hook up to a deck the same way. Hope these help. If not give me more of an idea for what your having trouble with. Elon
Boney Posted July 23, 2006 Author Posted July 23, 2006 Thank you very much Elon, that has helped me out a lot. Tomorrow I will try and see what I am able to do. Thnx =:)
Boney Posted July 24, 2006 Author Posted July 24, 2006 Does anyone now the diameter of the pully that is on the BGB comming off to drive the belt of the center PTO ? The one I have I believe is not correct, to small. Thank you for any help.
ehertzfeld Posted July 24, 2006 Posted July 24, 2006 It looks like they would be a 4inch. Kinda hard to measure without pulling one off. But that should give you an idea. Elon
Boney Posted July 25, 2006 Author Posted July 25, 2006 Thnx Elon appreciate all the help with this post.
Recommended Posts